Aero DR

Aero DR

Aero DR 14x17

Combo Sigma

Combo Sigma

Radiografía Computarizada (CR)

Frontpage Slideshow | Copyright © 2006-2012 JoomlaWorks Ltd.

  • World's Lightest Weight (including battery) 14"x17": 2.9kg / 17"x17": 3.6kg
  • Energy Conservation Design:16hr Stand-by time

green products


High Image Quality & Lower Doses

Scintillator Direct-Contact Technology

We succeeded in creating a new technology whereby a CsI scintillator is made to contact directly over a TFT*1 sensor panel without any protective layer in between them. This technology has made it possible to guide the light emitted from the scintillator to the photodiode without causing the light to be dispersed at the interface with the TFT sensor.

scintillator directcontact technology1

High Image Quality and Lower Doses

The optimal combination of the AeroDR detector using a KonicaMinolta CsI scintillator combined with the newly

feature img 001

developed lownoise readout ICs delivers a high DQE*3 even at a low dose. It is considered therefore that the AeroDR is effective to reduce the amount of radiation exposure.
At the same time, we achieved the wider dynamic range of DR comparable to CR. This means that in radiography of shoulder joints, for example, the AeroDR permits describing the skin line accurately even when the radiographic conditions change alongthe way.

*3 DQE…Detective Quantum Efficiency

A High DQE

Easy Workflow & Reliability

Universal Solution for the Existing X-ray Room

The AeroDR detector is the same as an ISO 4090 compliant film cassette in size so that it will fit any existing wall-stand or table bucky tray.

Shared FPD Solution

AeroDR can be used anywhere with" the Shared FPD Solution". As soon as AeroDR is registered to any X-ray room, AeroDR will be ready to use in the X-ray room immediately.

feature img 002

Integrated Control Station CS-7

CS-7 can control not only the AeroDR detectors but also X-ray generators and Konica Minolta existing CR family. No need to operate the X-ray console to adjust X-ray exposure conditions.*5

feature img 003

Quick Preview and Smart GUI

After exposure, a preview image immediately appears on the display of the new CS-7 console in less than two seconds. The CS-7 has a user-friendly graphic interface adding new and powerful proprietary functions. GUI design can be modified to customer preferences flexibly, succeeding the conventional console design.

feature img 004

Power-saving Technology

feature img 005 Patient safety is of primary importance, therefore the lithium ion capacitor, the world newest technology, was adopted as a battery technology which has many advantages despite of demanding a lower power consuming panel design, which has been overcome by employing low power ICs and a power-saving control.

New Battery Technology Achieves Light-weight yet Rigid Body

The lithium ion capacitor has a charge and discharge cycle life that is tremendously longer than a lithium ion battery and does not markedly decrease in capacity even after it has continuously been used for many years. Therefore, it is possible to be built in to AeroDR and also friendly to the environment. In this case, the structure of the cassette case has become so simple that it is possible to significantly reduce the weight of the cassette and increase the mechanical strength of the cassette..

Reliable, Rapidly Rechargeable and Long-Life Battery

aerodr characteristics

The lithium ion capacitor, which charges quickly in a battery charger or through a tethered connection, has

a long charge and discharge cycle life that does not need to be replaced during the expected life cycle of the detector. If the capacitor gets exhausted in emergency, AeroDR gets over 10 images by the capacitor being recharged for only three minutes.

Light-weight & Durable

World's Lightest Weight Wireless FPD (14"x17" and 17"x17")

The AeroDR Detector is the lightest FPD in the world weighing as little as 2.9kg (14" x 17"panel )/3.6kg(17"x17"panel) and supports wireless networking which transmits captured images to the console. Technologists can easily perform non bucky exams such as table top or cross table projections.

feature img 006

Durable Monocoque Structured Cassette

We adopted the "Monocoque case" to ensure trouble-free operation even under substantial shock or load. Since the battery is incorporated in the cassette (it need not be replaced), it is unnecessary to provide the case with a notch for battery replacement which reduces the rigidity of the case. Because of this, the cassette case that is appreciably light in weight has sufficient rigidity. Thanks in part to the buffer effect of the built-in battery, the load bearing performance of the cassette is the same as that of our CR cassette.

light weight durable2

Sealed and Protected Scintillator

In order to prevent the CsI crystal from being deformed by local concentration of external force, a double-glass structure in which the CsI scintillator glass plate and the TF T panel glass plate are overlapped and sealed together is adopted for AeroDR. The double-glass structure not only enhances the load-bearing performance but also prevents the scintillator edge from being deformed by a mechanical shock (e.g., fall or striking of the cassette) and the TFT sensor panel glass plate from being broken.

light weight durable3



Type Portable flat panel detector
based on amorphous silicon (a-Si)
Scintillator CsI (Cesium Iodide)
Weight 2.9 kg
Pixel Size 175 μm
Image Field 1,996 x 2,434 pixels (4.8 million pixels)
Power/Communications Tether Possible
WLAN Standard WLAN standard IEEE 802.11a
Dynamic Range 4 digits
Dimensions (WxLxT) 383.7 x 460.2 x 15.9 mm
※Equivalent to standard 14 x17" cassette
Charging Time Empty to Full 30 minuties with battery charger
Operating Time 5.5 hours / 200 images
*Under conditions that the interval between studies is five minutes and three images are captured in each study.
Battery Life Cycle Same as the product life cycle

AeroDR Battery Charger

Power 100/110/115/120/200/230/240 VAC
Weight 7.2 kg
Dimensions ( W x D x H) 560 x 250 x 153mm

spec img 001

Control Station CS-7

Image Processing Automatic Gradation Processing (G Processing)
Frequency Processing (F Processing)
Equalization Processing (E Processing)
Hybrid Processing (H Processing)
Hybrid Smoth Processing (HS Processing)
Image Output Host : Up to 4 channels
Printer : Up to 2 channels
DICOM Support Basic Greyscale Print Management (SCU)
Storage (SCU)
Modality Worklist Management
Modality Performed Procedure Step
Greyscale Standard Display Function (print output)
CR / DR Connections AeroDR : Up to 4 simultaneous active detectors
REGIUS Cassette Reader : Up to 15 units
Main Options ●Hardware options
Bar-code Reader for REGIUS Cassette Registration
In-room Sub Monitor
●Software options
DICOM Storage Output
X-ray Generator Connection
Media Storage
Text Annotation
Automatic Body Part Recognition
Automatic Processing Parameter Study


SALUMED S.A. ©2021 • Todos los derechos reservados | Diseñado por IDSM